Follow Us: Follow Us on Facebook Follow Us on Twitter Follow Us on Pinterest Follow Us on Youtube

Setting up a Drip System for Your Garden? 4 Tips to Help You Out

If you’re new to gardening, providing water to the garden is essential for its survival. If you are one that often forgets about watering the garden, there is an option for you. A drop system for your garden can provide regular water to your garden. A drip irrigation system is a lower pressure water system that can deliver water to home landscapes using a stream, spray, or drip system. It can be concealed and set on a timer so there is no more forgetting about watering the plants. The system helps keep the roots moist and not soaked compared to some other methods. An easier method to water your garden is by setting up a drip system.

Setting up a Drip System for Your Garden

Find the Correct System for Your Garden

Depending on the size of the garden is how big the drip system needs to be. A ¼ inch or ½ inch hose fitting should suffice for the drip system, this will allow the water to flow properly without getting clogged. The tubing for the system can be laid on the ground and then covered with bark mulch. The tubing can be purchased pre-punched or you can purchase tubing and punch the holes yourself at about every 18 inches or so.

Stainless Steel Valves

To turn the drip system on, you will need to have a stainless steel valve. Stainless steel valves are rugged and do not break as easily as plastic ones do. The valve can be connected to a plastic irrigation system, allowing the system to be more secure and not leak from the valve. This valve is set to the actual drip system tubing if you need to prevent water from flowing or if you are going away on vacation and do not wish to use the system.

Install Stakes

Stakes help secure the drip system into place. Only do this after you have the tubing in position. When using the ground stakes, hook the plastic stake to the top of the tubing and then secure it to the ground. This will hold the tubing in place and ensure the system will not move out of place allowing the water to drip where you need it to.

Test the System

Once you have the piping with the holes and the valve installed, it’s time to test the system. Turn the water on and make sure the valve doesn’t leak and if it does, readjust the valve until there are no more leaks. The water should flow smoothly and evenly into the garden. Once the system is properly adjusted and working, you can cover it with some mulch to make the system more discreet.

Drip systems are an easier and more efficient way to water your garden. Not only does it save time, but it also saves water by evenly distributing a water drip to your garden as to not completely soak the garden.

——

Author Bio: Rachelle Wilber is a freelance writer living in the San Diego, California area. She graduated from San Diego State University with her Bachelor’s Degree in Journalism and Media Studies. She tries to find an interest in all topics and themes, which prompts her writing. When she isn’t on her porch writing in the sun, you can find her shopping, at the beach, or at the gym. Follow her on Twitter and Facebook: @RachelleWilber; https://www.facebook.com/profile.php?id=100009221637700

Ultimate Plant Cage Ultimate Plant Clip Global Garden Friends products
Top
$0.000 items

Cart